Installation - Geemarc LoopHEAR 20 Handbuch

INSTALLATION

INSTALLATION
(1) Connect the power supply as shown in the diagram
(2) Place the headset in a charging cradle in the
Charger base. Verify that the red LED charging
indicator is ON. When the battery is fully charged a
green LED turns on.
Left cradle
charging
Indicator
(Red/Green)
NOTE: It is not possible to overcharge the battery. We
recommend that the headset be placed in the charging cradle
when not in use.
AC 110V-240V,
DC 5V adaptor (0.5~2.1A)
5
Right cradle
charging
Indicator
(Red/Green)