Bosch Rexroth PRC 7 00-L /W 403 Serie Typspezifische Anleitung Seite 46

46/47 Bosch Rexroth AG | Electric Drives and Controls
50002 Intermediate circuit symmetry error
50003 Intermediate circuit undervoltage
50004 System phase failure detection
50005 Heat sink temperature sensor defective
50006 Reference voltage error
50007 Driver error
50008 Power unit hardware error (reference voltage)
50009 Power unit hardware error (analog)
50010 Power unit hardware error (driver module)
50011 General error power unit
50012 Fault in DPRAM interface to the power unit
50013 Fault in DPRAM to the S3-Interface
50014 Fault in DPRAM to the WSI Interface
50015 Error while reading of the electrical type plate of the CPU module
50016 Error while reading of the electrical type plate of communication
module
50017 Error while reading of the electrical type plate of power unit module
50018 Error while reading of the electrical type plate of the complete device
Hint: In future developments the list can be extended.
R911381576 | PRC 7x00-Lx/Wx-403