Klarstein Hot Spot Crystal Flow 10035036 Bedienungsanleitung Seite 34

EN
Note: each step must be operated within 2 min, or it will exit setting and screen will
recover to initial display.
Anti-frost: appliance keep room temperature at default 5 °C to prevent frost.
Comfort: comfortable level achieved by setting power and temperature upon need.
(Reference to step 2&3)
24 Hour Timer – Auto Off
In P1 mode, touch twice quickly to activate 24 hour timer setting, the icon
flashes. Touch  or - to set timer among 0 to 24. Leave the setting for 5s,
stops
flashing, timer setting is confirmed. Screen will show ambient temperature and counting-
down hour in turn.
Touch again could cancel the setting. Screen will turn to show room temperature.
Child Lock Function
In standby mode, long touch  and  at the same time for 3 seconds to activate child
lock function, screen will show '.[ . . ].' after setting and will recover to initial display in 5
seconds. Other function is invalid once child lock function works. Once button is touch,
screen will flash '.[ . . ].' to remind you child lock function is working and recover to initial
display in 5 seconds.
Long touch  and  at the same time for 3 seconds again could cancel child lock
function.
Window Open Detection Function
In any working mode (in spite of anti-frost), long touch for 3 seconds to activate
window open detection icon flashes on the screen.
Long touch for 3 seconds again could cancel the setting, the window open detection
icon disappears.
In window open detection mode, room temperature is found to drop 5°C in 10 minutes
when appliance is heating. Appliance will consider the window may be open and start
detection. In the next 30 minutes, if room temperature is found to be the same or lower
than before, appliance will consider the window is open and stop heating. At the same
time, the icon stops flashing and keep lighting up to remind user to close the window.
When the window is closed, touch to recover normal operation , flashes again.
Recovery of Factory Setting
Touch MODE and  at the same time twice quickly. The appliance will recover to initial
factory setting.
34