Assembly - Bosch Rexroth ErgoSpin Serie Montageanleitung

3608870H86/2020-01 | ErgoSpin/CC-ErgoSpin

Assembly

6 Assembly
CAUTION
The product is not protected against
incorrect assembly/disassembly!
Risk of injury and damage to the device during
subsequent operation.
Assemble/disassemble the product

according to the following information and
in the correct order.
Only qualified personnel are authorized to

assemble/disassemble the product.
Do not clamp the hand-held nutrunner into

a vise or the like.
Pull the plug out of the socket before

assembling/disassembling accessory
parts.
CAUTION
Risk caused by missing torque support at
the hand-held nutrunner in case of high
torques!
When hand-held nutrunners are used for
performing tightening operations with high
torques, the developing forces may cause
injuries, especially to joints (see also EN 11148
and EN 1005 as currently applicable).
Recommendations:
Right-angle nutrunners require the

installation and use of a torque support
when torques exceed 40 Nm.
Pistol grip nutrunners require the

installation and use of a torque support
when torques exceed 10 Nm.
Also observe country-specific and/or

company-specific regulations.
Bosch Rexroth AG
CAUTION
Improper handling!
Under unfavorable conditions, handling or
assembling/disassembling specific parts and
components in an unsuitable manner could
cause injuries. Injury due to crushing,
shearing, cutting, impact!
Observe the general construction and

safety regulations for handling and as-
sembly/disassembly.
Use suitable assembly/disassembly and

transport equipment.
Prevent trapping and crushing injuries by

using suitable precautions.
Only use suitable tools.

Use special tools if stipulated.

Use tools appropriately.

If necessary, use suitable protective

equipment (e. g. protective goggles,
safety shoes, protective gloves).
Do not stand under suspended loads.

Lay cables and lines in accordance with

the permissible bending radiuses so
that they cannot be damaged and no
one can trip over them.
73/104