Setting The Temperature - Dometic DS200 Montage- Und Bedienungsanleitung

DS200 – DS600
✔ The LED initially flashes several times and then lights continuously.
✔ The mini fridge is switched on.
I
NOTE
8
After switching on, the mini fridge needs several hours to reach the cool-
ing temperature within the mini fridge compartment.
7.5

Setting the temperature

To avoid food waste, note the following:
• Keep temperature fluctuation as low as possible. Only open the refrigerator as
often and for as long as necessary. Store the foodstuff in such a way that the air
can still circulate well.
• Adjust the temperature to the quantity and type of the foodstuff.
• Store the different foodstuff types as shown in the figures.
• Foodstuff can easily absorb or release odor or taste. Always store foodstuff cov-
ered or in closed containers/bottles.
➤ Set the thermostatic control (fig. h, page 12) to the middle position.
Depending on the filling and installation conditions, a different position may be
necessary. Turning the controller toward the large symbol increases the cooling;
turning it toward the smaller symbol reduces the cooling.
7.6 Switching off and storing
If you intend to not use the mini fridge for a longer period, proceed as follows:
➤ Pull the power plug out of the socket.
➤ Clean the mini fridge (see chapter "Cleaning and maintenance" on page 28).
➤ Leave the door open to prevent odors from forming.
7.7 Replacing the LED
A
NOTICE! Damage hazard
The lamp can only be replaced by the manufacturer, a service agent or
similarly qualified person to avoid hazard.
EN
Using the mini fridge
27