Device Description; Initial Use - Beurer HS 40 Gebrauchsanweisung

• Under no circumstances should you open or repair the device yourself, as faultless functionality
can no longer be guaranteed thereafter. Failure to comply will invalidate the warranty.
• In the event of a fault or damage, have the device repaired by a certified specialist workshop.
• Never leave the device unattended during use.
• Do not use the device outside.
• If you pass the device on to someone else, make sure to also pass on these instructions for use.

5. Device description

1
9

6. Initial use

Warning
• Position yourself on a dry, non-conductive surface. Risk of electric shock!
• Ensure that your hands are dry. Risk of electric shock!
• Your hair must be dry! Risk of electric shock!
• The device can become very hot depending on the temperature setting and the duration of use.
When the device is hot, it must only be held using the handle – risk of burns and fire!
• Do not touch the hot plates [1]. Risk of burns!
• Do not clamp objects between the hot plates [1].
• Switch the device off immediately if it is faulty or not working properly.
1. Ceramic-coated heating plates with tour-
maline crystals
2. Temperature display with coloured LEDs
Temperature range:
Green : 120-140 °C
Yellow: 160-180 °C
Red : 200-220 °C
3. Button for increasing the temperature (+)
2
4. Button for decreasing the temperature (–)
3
5. On/off switch
4
5
6. 360° rotatable joint
7. Bend protection with hanging eyelet
8. Mains cable
6
9. Lock
7
8
15