Attaching A Lens - Sony FX3 Cinema Line Serie Einführungsanleitung

Attaching a lens

1
Remove the body cap from the camera and the rear lens cap from the
rear of the lens.
2
Mount the lens by aligning the two white index marks (mounting
indexes) on the lens and camera.
3
While pushing the lens lightly toward the camera, turn the lens slowly
in the direction of the arrow until it clicks into the locked position.
Attaching the XLR handle unit (supplied)
By attaching the XLR handle
unit, up to four audio devices
can be connected to the camera
simultaneously.
1
Remove the shoe cap from the
camera and the handle shoe cap
from the XLR handle unit.
2
Slide the XLR handle unit into
the Multi Interface Shoe until
it reaches the back of the shoe.
Then, be sure to securely tighten
the screws on either side using a
coin, etc.
GB
6
Mounting indexes
Screw
Screw