Cleaning And Maintenance - Klarstein 10026951 Handbuch

Cleaning of the Carbon Grease Filter Mesh
The filter mesh is made of high-density stainless steel. Please do not use the corrosive detergent on
it. Keeping this filter clean will keep the appliance running correctly. Please strictly follow the guide-
lines below.
• Method 1: Put the mesh into 40-50 c clean water, pour on detergent, and soak for 2-3 mins. Wear
gloves and clean with a soft brush. Please do not apply too much pressure, as the mesh is delicate
and will damage easy.
• Method 2: If instructed to do so, it can be put into a dishwasher, set the temperature at around
60 degrees.
Notice of cleaning cooker hood
• To protect the main body from corrosion over a long period of time, the cooker hood should be
• cleaned with hot water plus non corrosive detergent every two months.
• Please do not use abrasive detergent for it will damage the body.
• Keep the motor and other spare parts free from water, as this will cause damage to the appliance.
• Before cleaning the appliance please remember to cut off power
• The carbon filter shouldn't be exposed to heat.
• Please don't tear open the fixed bar around the carbon filter
• If the plug or cord is damaged, please replace it with special soft cord.
Installation of the carbon filter
• Remove the grease filters.
• The charcoal filters are located at both end of the motor. Turn the charcoal filters until they are
unscrewed.
9

Cleaning and Maintenance