Klarstein Amazonia 6 Secret Bedienungsanleitung Seite 49

Filling the rinse aid reservoir
1
Remove the rinse aid reservoir cap by
rotating it counterclockwise.
Adjusting the rinse aid reservoir
Turn the rinse aid indicator dial to a number between
1 and 4. The higher the number, the more rinse aid the
dishwasher uses. If the dishes are not drying properly
or are spotted, adjust the dial to the next higher
number until your dishes are spot-free. Reduce it if there
are sticky whitish stains on your dishes or a bluish film
on glassware or knife blades.
2
Carefully pour in the rinse-aid into its
dispenser, whilst avoiding it to overflow.
3
Close the rinse aid reservoir cap by
rotating it clockwise.
Note: Clean up any spilled rinse aid
with an absorbent cloth to avoid
excessive foaming during the next
wash.
EN
49