Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Switch Replacement for CAT3 PRO
BEI.0369.0 • 2021-02-16
1 Replacing the switch
7 Mount the nut with ring wrench (SW 14)
on the flange plug (tightening
torque 1 Nm).
8 Mount the connector housing and mount
the cylinder head screws (M3 × 16)
with the Allen key (SW 2.5) (tightening
torque 0.4 Nm).
9 Attach the protective cap to the flange
plug.
EN - 11
Werbung
