Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 Replacing the switch
EN - 8
Switch Replacement for CAT3 PRO
8 We recommend marking the position of
the switch with sealing wax.
9 Place the cable in the connector housing.
Ensure that the cables between the switch
housing and CAT3 PRO housing are not
pinched.
10Mount the nut with ring wrench (SW 14)
on the flange plug (tightening torque
1 Nm).
11 Mount the connector housing and mount
the cylinder head screws (M3 × 16) with
the Allen key (SW 2.5) (tightening torque
0.4 Nm).
BEI.0369.0 • 2021-02-16
Werbung
