Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Switch Replacement for CAT3 PRO
1.1 Disassembling the switch
BEI.0369.0 • 2021-02-16
1 Replacing the switch
1 Use the ring wrench (SW 14) to loosen
the nut from the flange plug.
2 Loosen the cylinder head screws
(M3 × 16) with the Allen key (SW 2.5)
and remove them.
3 Insert the flange plug in the connector
housing and remove the connector
housing.
4 Loosen the cylinder head screws (M3 × 6)
with the Allen key (SW 2.5) and remove
them from the retaining sheet.
EN - 3
Werbung
