Maintenance; Daily Maintenance; Disposal - Holzmann WP50H Originalbetriebsanleitung

15 MAINTENANCE

Don't clean or do maintenance on the machine while it is still connected to the pow-
er supply:
Damages to machine and injuries might occur due to unintended switching on of the
machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it
be serviced by trained persons only.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Before first operation as well as later on every 100 operation hours you should lubricate all con-
necting parts (if required, remove beforehand with a brush all swarfs and dust).
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the hydraulic system.
Store the machine in a closed, dry location.
The machine is low maintenance and is low in parts of the maintenance operator must undergo.
Repair jobs shall be performed by respectively trained professionals only!
After each workshift:
Clean the machine entirely.
The machine is low maintenance and is low in parts of the
A maintenance operator must undergo.
Regularly check whether the warning and safety at machine and perfectly legible.
Faults or defects that may affect the safety of the machine, be immediately resolved.

15.1 Daily Maintenance

Komponente
Entire Machine
Safety Devices

15.2 Disposal

Do not dispose of the LBM 290K in residual waste. Contact your local authori-
ties for information regarding the available disposal options. When you buy at
your local dealer for a replacement unit, the latter is obliged to exchange your old
HOLZMANN Maschinen Austria
All manuals and user guides at all-guides.com
Clean

All components and controls are properly tightened

www.holzmann-maschinen.at
A T T E N T I O N
Tätigkeit
Werkstattpresse / shop press
MAINTENANCE
Seite 48
WP 50H - WP 75H - WP 100