13.2.3 Pump assembling WP 50H
Move the pump assy (51) to the outside of the
post, use bolt (47) and washer (48) which dis-
mantled just now to twist tight on the right
connecting plate (34)
13.2.4 Pump assembling WP 75H
Pump assemble: attach the pump assy (57) to pump setting plate (49) by using three bolts
(51) and lock washer (50) and twist tight.
Oil hose 1 assemble: dismantle the plug from oil hose 1 (58) then assemble the o-ring(45), also
dismantle the plug from ram assy (37), connect the oil hose 1 (58) to ram assy (37) and twist
tight.
Oil hose 2 assemble: attach the o-ring (45) to gauge fitting (43), then put the oil hose
13.2.5 Pressure gauge assembling WP 50 / WP 75H
Assemble the nylon ring (42) to gauge fitting (43), then put the pressure gauge (41) and twist
tight. Remark: twist as tight as possible, otherwise it will be leak. Attach the gauge fitting to the
suitable upper cross beam and twist bolt (60), dismantle the plug screw of Junction rod (46) af-
ter adjust and tight the gauge direction. Attach the Junction rod (46) to the gauge fitting (43)
and twist tight
HOLZMANN Maschinen Austria
All manuals and user guides at all-guides.com
www.holzmann-maschinen.at
Werkstattpresse / shop press
ASSEMBLY
Seite 41
WP 50H - WP 75H - WP 100