Safety; Intended Use; Ambient Conditons; Prohibited Use - Holzmann WP50H Originalbetriebsanleitung

12 SAFETY

12.1 Intended use

The workshop press may only be used in technically perfect condition and intended purpose,
and danger! Disorders, which may affect the safety, be immediately resolved!
It is generally forbidden to modify safety equipment of the machine or to make ineffective!
The Workshop Press WP 50H / WP 75H / WP 100H are exclusively for press in
articles (ball bearings, ...) and deformation of materials provided.
For a different or additional use and resulting damage or injury takes HOLZMANN
MACHINES no responsibility or warranty.

12.1.1 Ambient conditons

The machine may be operated:
humidity
temperature
The machine shall not be operated outdoors or in wet or damp areas.
The machine shall not be operated in areas exposed to increased fire or explosion ha-
zard.

12.2 Prohibited use

 The operation of the machine under conditions outside of this manual on given
limits is not allowed.
 Never exceed the maximum capacity of the press.
Never exceed the maximum stroke of the hydraulic cylinder, otherwise the unit

may be damaged or parts thereof.
Before starting the pressing process ensures that the press table was aligned

horizontally and secured to the frame bolts on all 4 mounting points. Use without
bolts is prohibited!
Any changes in the design of the machine is not permitted.

The operation of the machine in a manner or for purposes which are not equivalent

to the instructions of this manual to 100%, is prohibited.
 Never leave the machine never, especially not when children are around!

12.3 Security Instructions

Missing or non-readable security stickers have to be replaced immediately!
To avoid malfunction, machine defects and injuries, read the following security instructions!
HOLZMANN Maschinen Austria
All manuals and user guides at all-guides.com
www.holzmann-maschinen.at
max. 70%
+5°С to +40°С
+41°F to +104°F
Werkstattpresse / shop press
SAFETY
Seite 35
WP 50H - WP 75H - WP 100