Assembly; Initial Activities; Delivery Content; Workplace Requirements - Holzmann WP50H Originalbetriebsanleitung

13 ASSEMBLY

13.1 Initial activities

13.1.1 Delivery content

Please check the product contents immediately after receiving for any eventual transport damage
or missing parts. Claims from transport damage or missing parts must be placed immediately
after initial machine receipt and unpacking before putting the machine into operation. Please
understand that later claims cannot be accepted anymore.

13.1.2 Workplace requirements

The workplace has to fulfill the requirements stated in section 13.
The ground has to be even, in level and hard. It must be suitable at least to weight it with double
weight per square meter than the machines net weight.
The chosen workplace must have access to a suitable electric supply net hat complies with the
machines requirements.
The machine must be placed in a way that at least 0.8m room free space around the machine.
For longer workpieces sufficient additional place before and behind the machine should be calcu-
lated.

13.1.3 Transport

The machine can be transported in package with a forklift.
The machine is very heavy. The machine shall be lifted from crate with a suitable lifting device
only that is certified to be able to carry the machines load.
The transport and the lifting of the machine shall be performed by quali-
fied and respectively trained persons only.

13.1.4 Preparation of the surfaces

Uncoated metal machine parts have been insulated with a greasy layer to inhibit corrosion.
This layer has to be removed. You can use standard solvents that do not damage the machine sur-
face.
Do not use solvents based on nitrite, aggressive solvents like break cleaners or
scrubbing agents!
These damage the machine surface.
HOLZMANN Maschinen Austria
All manuals and user guides at all-guides.com
N O T I C E
www.holzmann-maschinen.at
W A R N I N G
Werkstattpresse / shop press
ASSEMBLY
Seite 38
WP 50H - WP 75H - WP 100