Functions; Central Command - Becker Centronic EasyControl EC545-II Montage- Und Betriebsanleitung

Channel
The channel of a handheld transmitter can be programmed into one or several
receivers. One or several receivers are controlled via an individual or group com-
mand respectively.
Central command
If all the transmitter channels are selected, all the assigned receivers/receiver
groups can be controlled simultaneously.
Channel selector button
The channel selector button can be used to select up to 5 channels. The indi-
vidual channels are indicated by the respective channel control light being il-
luminated.
If all the channel control lights illuminate simultaneously, the central command
can be programmed or executed.
Note
The programmed channel can be written down in the labelling space
underneath the transparent cover.
Channel control lights
A radio signal is indicated by the respective channel control light being illumi-
nated.
If the battery power decreases, the respective channel control light flashes
when transmitting.
Less battery power results in reduced transmitter power or operating range. If
the channel control light does not illuminate when pressing a button, replace
the battery.

Functions

de
en
fr
nl
15