Please Note The Following; Nightlight - Philips Avent SCD565 Benutzerhandbuch

7.3.1 Please note the following:

• Before you select Eco Max mode, make sure that
the parent unit and baby unit are within operating
range, see section 'Operating range' in chapter
'Using the baby monitor'. In Eco Max mode you
do not receive feedback when the parent unit is
out of range of the baby unit. You can check the
link by pressing any button on the parent unit.
• If there is no radio transmission from the baby
unit to the parent unit in Eco Max mode,
the sound level lights on the parent unit are off.
The sound level lights go on when the baby unit
reactivates radio transmission because the baby
makes a sound above the selected sensitivity level.
• If you want to operate the baby monitor in Eco
Max mode, make sure that the sensitivity level
is set between 1 and 3. If the sensitivity level is
set to level 4, the baby unit does not switch off
radio transmission in Eco Max mode.
7.3.2 Activating Eco Max mode
Select 'Eco Max' in the menu with the + and -
1
buttons and press OK to conirm.
When the display shows 'Turn On', press OK
2
to switch on the Eco Max mode.
The warning message 'No alert if out of range,
3
OK?' appears on the display. Press OK to conirm.
D
Note:
The warning message scrolls across the display
twice. If you do not press OK, the parent
unit leaves the menu and the Eco Max mode
remains off.
The Eco Max indication lashes on the
•
display. The 'link' light lashes green slowly
when the baby unit does not transmit any
signals to the parent unit.
When the parent unit receives a signal from
•
the baby unit because radio transmission
has been reactivated, the 'link' light turns
solid green.
7.3.3 Deactivating Eco Max mode
Press the MENU button
1
Use the + and - buttons to select 'Eco Max'
2
and press OK to conirm.
When the display shows 'Turn Off ', press OK
3
to conirm.

7.4 Nightlight

This option in the parent unit menu allows you to
switch the nightlight on the baby unit on and off.
Select 'Nightlight' in the menu with the + and
1
- buttons.
Press OK to choose 'Turn On'.
2
The nightlight symbol Q appears on the
•
display.
When the nightlight is on and you want to
3
switch it off, press OK to choose 'Turn Off '.
The nightlight symbol Q disappears from
•
the display.
15