Temperature; Clock - Philips Avent SCD565 Benutzerhandbuch

7.6.2 Repeat the feed timer
After step 5 in 'Setting and using the feed
1
timer', select 'Repeat' with the + and - buttons.
Press OK to conirm.
Choose 'Repeat ON' or 'Repeat OFF' and
2
press OK to conirm.
Select 'xx:xx Start' with the + and - buttons
3
and press OK to activate the feed timer
repeat function.
When you press any key to stop the feed
4
timer alert or if the alert stops automatically
after 2 minutes, the feed timer starts counting
down again.
7.6.3 Stopping the timer
Press the menu button and select 'Feed Timer'.
1
Use the + and - buttons to select 'Stop' and
2
press OK to conirm.

7.7 Temperature

A baby sleeps comfortably at a temperature
between 16°C/61°F and 20°C/68°F. You can set a
minimum and a maximum temperature range.
You can also set a temperature alert to warn you
that the temperature is outside the set range.
Select 'Temperature' in the menu with the +
1
and - buttons and press OK to conirm.
Select 'Temp Range' with the + and - buttons
2
and press OK to conirm.
The minimum temperature indication starts
•
lashing on the display.
Use the + and - buttons to set the minimum
3
temperature range between 10°C/50°F and
19°C/66°F. Press OK to conirm.
The maximum temperature indication starts
•
lashing on the display.
Use the + and - buttons to set the
4
maximum temperature range between
22°C/72°F and 37°C/99°F. Press OK to
conirm.
Select 'Alert' with the + and - buttons.
5
Press OK to conirm and to start setting the
temperature alert.
The message 'Alert' appears on the display.
•
Select 'Alert ON' or 'Alert OFF'. Press OK to
6
conirm.
If you choose 'Alert On', the temperature
•
alert symbol appears on the display.
Select 'Temp Scale' with the + and - buttons.
7
Press OK to conirm and to start setting the
temperature scale.
Select 'Celsius' or 'Fahrenheit' and press OK to
8
conirm.
The temperature in the set scale appears
•
on the display.
If the temperature is outside the set range,
•
the temperature alert symbol on the display
lashes and the message 'TOO HOT' or 'TOO
COLD' appears on the display. If you set the
alert to on, the parent unit also beeps.

7.8 Clock

The default setting for the clock is hidden. You can
choose to show the clock and set the clock time
in the menu of the parent unit.
Select 'Clock' in the menu with the + and -
1
buttons and press OK to conirm.
Use the + or - button to select 'Show Time'
2
and press OK to conirm.
Select 'Set Time' with the + and - buttons.
3
Press OK to conirm and to start setting the clock.
The hour indication starts lashing on the
•
display.
Set the hour and press OK to conirm.
4
The minutes indication starts lashing on the
•
display.
17