Additional Safety Instructions - Scheppach deco-flex Original Bedienungsanleitung

8. Wear suitable clothing
- Do not wear wide clothing or jewellery, which
can become entangled in moving parts.
- When working outdoors, anti-slip footwear is
recommended.
- Wear a hair net if you have long hair.
9. Use personal safety equipment
- Wear safety goggles.
- Use a dust mask when working on dusty jobs.
10. Connect up the dust extraction system
- If connections for dust extraction and a col-
lecting device are present, make sure that
they are connected and used properly.
11. Do not use the cable for purposes for which
it is not intended
- Do not use the cable to pull the plug out of
the socket. Protect the cable from heat, oil and
sharp edges.
12. Secure the workpiece
- Use the clamping devices or a vice to hold the
workpiece in place. In this manner, it is held
more securely than with your hand.
13. Avoid abnormal working postures
- Make sure you stand squarely and keep your
balance at all times.
14. Take care of your tools
- Keep cutting tools sharp and clean in order to
be able to work better and more safely.
- Follow the instructions for lubrication and for
tool replacement.
- Check the connection cable of the electric tool
regularly and have it replaced by a recognised
specialist when damaged.
- Check theextension cable regularly and re-
place it if damaged.
- Keep handles dry and free from oil and grease.
15. Pull the connector out of the socket
- When the electric tool is not in use or prior to
maintenance and when replacing tools such
as saw blades, bits, milling heads.
16. Always remove keys and wrenches after use
- Always check that keys, wrenches and other
adjusting tools have been removed before you
switch on the equipment.
17. Avoid unintentional starting
- Make sure that the switch is turned off when
connecting the tool to the power supply.
18. Use extension cables for outdoors
- Check that it is approved for outdoor duty and
is marked accordingly.
19. Be alert at all times
- Watch what you are doing. Use common
sense when working. Never use the tool when
you are distracted.
20. Check the electric tool for potential damage
- Protective devices or other parts with minor
damage must be carefully inspected to ensure
22 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
that they function correctly and as intended
prior to continued use of the electric tool.
- Check whether the moving parts function
faultlessly and do not jam or whether parts are
damaged. All parts must be correctly mounted
and all conditions must be fulfilled to ensure
fault-free operation of the electric tool.
- Damaged protective devices and parts must
be properly repaired or replaced by a recog-
nised specialist workshop, insofar as nothing
different is specified in the user manual.
- Damaged switches have to be replaced by a
customer service workshop.
- Do not use any electric tool on which the
switch cannot be switched on and off.
21. ATTENTION
- The use of other insertion tools and other ac-
cessories can entail a danger of injury.
22. Have your electric tool repaired by a quali-
fied electrician
- This electric tool conforms to the applicable
safety regulations. Repairs may only be per-
formed by an electrician using original spare
parts. Otherwise accidents can occur.
WARNING
This electric tool generates an electromagnetic field
during operation. This field can impair active or pas-
sive medical implants under certain conditions. In or-
der to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the electric tool.

5.2 Additional safety instructions

• Switch the machine off immediately and pull the
power plug in an emergency.
• Follow all these safety instructions before and while
working with the saw.
• Do not use this saw to cut fire wood.
• Do not use this saw to cross-cut roundwood with-
out a suitable holding device.
• The machine is equipped with a safety switch to
prevent it from being switched on again acciden-
tally after a power failure.
• If you need to use an extension cable, make sure
its conductor cross-section is big enough for the
saw's power consumption. Minimum cross-section
1,5 mm .
2
• If you use a cable reel, the complete cable must be
pulled off the reel.
• Persons working on the machine should not be dis-
tracted.
• After you have switched off the motor, never slow
down the saw blade by applying pressure to its
side.