Audiotec Fischer HELIX V TWELVE DSP Bedienungsanleitung Seite 41

Workflow step 3 – Configuration of the virtual channels and notes on the application of the DSP
sound effects (SFX)
Now switch to the "Virtual" menu of the DSP PC-Tool. Here you get an overview of the signal flow of the
individual channels and the activated sound effects. In addition, it is possible to influence the tonality of all
subsequent output channels of a virtual channel at the same time, for example with the help of the equal-
izer, polarity and other functions.
Notes on the configuration of the DSP sound effects (SFX)
The HELIX V TWELVE DSP provides unique DSP sound effects such as Augmented Bass Processing,
RealCenter, and more when "Virtual Channel Processing" is enabled. In order to enjoy the DSP sound
effects, certain settings must be made in the hardware and software configuration.
Note: The DSP sound effects are only available in the V TWELVE DSP when "Virtual Channel Processing"
is enabled. "VCP" can be activated in the DCM menu of the DSP PC-Tool software.
Notes for center processing with its features "RealCenter" and "ClarityXpander"
To be able to use the RealCenter and ClarityXpander function for a center speaker, the following steps must
be carried out:
1a. It is necessary to assign an input signal to the virtual channels "Front L Full" and "Front R Full" (see
workflow step 1).
1b. In the input routing you have to assign either a sum signal (front left + front right) or an existing center
signal to the virtual channel "Front Center Full".
41