Audiotec Fischer HELIX V TWELVE DSP Bedienungsanleitung Seite 36

Connection to a PC
It is possible to freely configure the HELIX
V TWELVE DSP with our DSP PC-Tool software.
The user interface is designed for easy handling
of all functions and allows an individual adjustment
of each of the fourteen DSP channels. Prior to
connecting the amplifier to your PC visit our web-
site and download the latest version of the DSP
PC-Tool software.
Check from time to time for software updates. You
will find the software and the respective user manu-
al on www.audiotec-fischer.com.
We strongly recommend to carefully read the user
manual (Sound Tuning Magazine) before using the
software for the first time in order to avoid any com-
plications and failures.
Important: Make sure that the amplifier is not con-
nected to your computer before the software and
USB driver are installed!
In the following the most important steps how to
connect and the first start-up are described:
1. Download the latest version of the DSP
PC-Tool software (available on our website
www.audiotec-fischer.com) and install it on
your computer.
36
2. Connect the amplifier to your computer us-
ing the USB cable that is included in delivery.
If you have to bridge longer distances please
use an active USB extension cable with in-
tegrated repeater or the optionally available
WIFI CONTROL interface.
3. First turn on the amplifier and then start the
software. The operating software will be updat-
ed automatically to the latest version if it is not
up-to-date.
4. Now you are able to configure your HELIX
V TWELVE DSP with our intuitive DSP PC-Tool
software. Nevertheless, interesting and useful
hints can be found e.g. in our "Sound Tuning
Magazine", which can be downloaded for free
from our website.
Caution: We highly recommend to set the vol-
ume of your car radio to minimum position during
first start-up. Additionally no devices should be
connected to the amplifier until general settings in
the DSP PC-Tool software have been made. Es-
pecially if the V TWELVE DSP will be used in fully
active applications, a wrong setup can destroy your
speakers right away.