Respekta DIGI 8 GLAS PPS Bedienungs- Und Installationsanleitung Seite 46

time, oven in use symbol"
and "Auto" function symbol twinkle, buzzer will prompt the user for 5 minutes,
reminding the user that the cooking time is over .Like Pic 17.Pressing any key can
stop the buzzer and extinguish"Auto" function symbol.Like Pic 18.
Note 1：Cooking time setting range is 0：00-10：00.
Note 2： Not setting cooking time after power on, the appliance will automatically
shut down after working 10 hours, without buzzer reminding function.
1.5 Cooking end time setting function
In the state of function to be selected, press button "
and oven in use symbol "
first setting shows the current system time by default）,cooking end time and decimal
point symbol "
time is 0:00 ). When the icon "AUTO" and oven in use symbol "
set cooking end time by pressing"
cooking end time is 0:30).
Pic 19 Cooking end time setting initial state Pic 20 Cooking end time well set state
After choosing the time , lift the finger off the buttons and wait for 5 seconds, then the
icon "AUTO" and oven in use symbol "
Display screen will show system time, decimal point symbol "
keep bright. It means time is well set. See Pic 21.
Whenever user wants to adjust the timer, in the working status, push "
when user sees the icon "AUTO" twinkles, it will show the set cooking end time, and
user can adjust the time again. After setting is done, The display will change back to
system time.
Pic 21 Cooking end time working status
(All the icons always bright)
" extinguishes, system time, decimal point symbol "
"twinkle, display screen shows cooking end time（The
" keep bright. Display effect see Pic 19(Suppose current system
"or" ",well set diagram see Pic 20(Suppose
"stop twinkling and change to always bright.
Pic 22 Cooking finished diagram
(All the icons flickering)
17
" 4 times, then icon "AUTO"
"twinkle, you can
" and system time
" four times,
"