Respekta DIGI 8 GLAS PPS Bedienungs- Und Installationsanleitung Seite 45

Note ：Alarm clock time setting range is 0：00-23：59.
1.4 Cooking time setting function
In the state of function to be selected, press button"
and oven in use symbol icon "
set default display "0·00"）,cooking time and decimal point symbol "
display, see Pic 14.When the icon "AUTO" and oven in use symbol "
can set the cooking time by pressing"
minutes).
Pic 14 Cooking time setting initial state
After choosing the time , lift the finger off the buttons and wait for 5 seconds, then the
icon "AUTO" and oven in use symbol "
display. It means time is well set. Whenever user wants to adjust the timer, in the
working status, push "
use symbol "
adjust the timer again. After setting is done, the display will change back to system
time, decimal point symbol "
Pic 16 Cooking time working status
(All the icons always bright)
Pic 18 Cancel "Auto" function symbol display diagram(After cooking time over)
For example, set the timer 30 minutes. After 30 minutes, display screen shows system
" twinkle. The screen shows the cooking time（First
" three times, when user sees the icon "AUTO" and oven in
" twinkles, it will shows the set timer or the time left, and user can
" and system time keep bright. See Pic 16.
" 3 times, then the icon "AUTO"
"or" ".Well set diagram see Pic 15(Set 30
Pic 15 Cooking time well set state
"stop twinkling and change to always bright
Pic 17 Cooking time over diagram
(All the icons flickering)
16
" keep bright
"twinkle, user