BEFORE FIRST USE
s
Before using your multigrater for the first time, remove all potential stickers and
●
labels (apart from the type plate).
Disassemble the appliance as described in the chapter "Disassembling the
●
Multi grater" (see page 63).
Rinse all parts of the multigrater apart from the motor unit with warm water
●
(not above 50 °C) and some detergent. Make sure not to hurt yourself on the
GB
sharp grating blades in the cutting drums. Best use a dishwashing brush for the
cutting drums. Dry all parts carefully.
Wipe the motor unit clean with a soft, slightly moist towel.
●
When all parts are completely dry, reassemble the multigrater as described in
●
the chapter "Assembling the Multigrater".
AS S E MB LI N G TH E MUL TI GRATE R
s
ST EP 1 :
Place the motor unit on a smooth, dry, stable, moisture resistant and even work
●
surface, near a power outlet.
60