Extra-Thorough Cleaning Method; Cleaning The Trimmer - Philips SENSOTOUCH 3D RQ1290 Bedienungsanleitung

English
10
The shaver display stops showing the charging indication.
,
The cleaning light starts to flash and the shaver is automatically lowered into the cleaning fluid (Fig. 35).
,
The cleaning light flashes throughout the cleaning program, which takes a few minutes.
,
Note: RQ1007: The cleaning program takes 4 to 6 minutes.
Note: RQ1008: The auto and eco cleaning programs take 4 to 6 minutes. The intensive program takes approx. 35 minutes.
During the first phase of the cleaning program, the shaver automatically switches on and off several times and moves up and down.
,
During the second phase of the cleaning program, the shaver is placed in the drying position, indicated by the flashing drying symbol.
,
This phase takes approx. 2 hours. The shaver stays in this position until the end of the program. (Fig. 36)
Note: RQ1008: The drying phase takes 1 hour when you have selected the eco program.
After the cleaning program, the charging indication appears on the shaver display (see chapter 'The display').
,
Note: If you press the on/off button of the Jet Clean System during the cleaning program, the program aborts. In this case, the cleaning or drying light
stops flashing and the holder moves to the highest position.
Note: If you remove the adapter from the wall socket during the cleaning program, the program aborts. The holder remains in its current position. When
you put the adapter back into the wall socket, the holder moves to the highest position.
- When the cleaning fluid drops below the minimum level, the 'cleaning chamber empty' symbol starts to flash and the holder returns to its
starting position (Fig. 37).
- If you use the washing machine to clean your shaver every day, you need to refill the cleaning chamber approx. every 15 days.
cleaning the Jet clean system
Clean the cleaning chamber every 15 days.
You can wipe the outside of the Jet Clean System with a damp cloth.
1 Simultaneously press the release buttons on both sides of the Jet Clean System (1). Then lift the Jet Clean System off the cleaning
chamber (2). (Fig. 31)
The cleaning chamber remains behind.
,
2 Pour any remaining cleaning fluid out of the cleaning chamber. (Fig. 38)
You can simply pour the cleaning fluid down the sink.
3 Rinse the cleaning chamber under the tap (Fig. 39).
The cleaning chamber is not dishwasher-proof.
4 Fill the cleaning chamber with HQ200 cleaning fluid to a level between the two lines (Fig. 32).
5 Place the Jet Clean System back onto the cleaning chamber. (Fig. 33)
Make sure the release buttons click back into place.

Extra-thorough cleaning method

Make sure the appliance is switched off.
1 Pull the shaving unit straight off the shaver (Fig. 23).
Note: Do not turn the shaving unit while you pull it off the shaver.
2 Pull open the three shaving heads one by one (Fig. 40).
3 Press the retainer release tab (1) until the retainer opens (2) (Fig. 41).
Note: Do not clean more than one cutter and shaving guard at a time, since they are all matching sets. If you accidentally put a cutter in the wrong
shaving guard, it may take several weeks before optimal shaving performance is restored.
4 Remove the cutter from the shaving guard. (Fig. 42)
5 Clean the cutter with the brush supplied (Fig. 43).
6 Clean the inside of the shaving guard. (Fig. 44)
7 After cleaning, place the cutter back into the shaving guard with the cutter legs pointing downwards. (Fig. 45)
8 Press down the retainer over the cutter (Fig. 46).
9 Close the shaving heads.
10 Insert the lug of the shaving unit into the slot in the top of the shaver (1). Then press the shaving unit downwards (2) to attach it to the
shaver ('click') (Fig. 25).

cleaning the trimmer

Clean the trimmer every time you have used it.
1 Press the trimmer slide forwards to slide out the trimmer (Fig. 24).
2 Rinse the trimmer under a hot tap for some time. (Fig. 47)
3 Press the trimmer slide backwards to retract the trimmer.
Tip: For optimal trimmer performance, lubricate the trimmer teeth with a drop of sewing machine oil every six months.
storage
1 Slide the protection cap onto the shaving unit to prevent damage to the shaving heads (Fig. 48).
2 Store the shaver in the pouch supplied.