Extra-Thorough Cleaning Method - Philips HS8040 Bedienungsanleitung

Question
Why does the
shaver suddenly
produce a
strange noise?
Answer
You probably did not reassemble the shaving unit
properly. Place the cutters in the shaving head
holders with the cutter legs pointing upwards.
Place the guards onto the holders (over the cutters)
and turn them anticlockwise until they lock into
position. One of the guards does not have a shaving
conditioner hole in the centre and needs to be
attached onto a specific holder. This is the holder
that is closest to the on/off button when the shaving
unit is assembled on the shaver. If the cutters and
the guards have become mixed up, it may take
several weeks before optimal shaving performance
is restored.

Extra-thorough cleaning method

Make sure the appliance is switched off.
1 Pull the shaving unit off the shaver.
2 Turn the guard clockwise and lift it from the
shaving unit.
Note: Only remove one shaving head at a time. This
ensures that you always put the shaving head back
into its original holder, which is necessary because two
of the shaving heads have special holes for the shaving
conditioner. This also ensures that you do not mix up
the cutters and guards of different shaving heads,
which affects the shaving performance.
EngliSH
21