Secondary Device Functions; External Signal Blanking - Balluff BES M12EH1-L01C40B-S04G-L04 Anleitung

BES M12EH1-L01C40B-S04G-L04 / BES M18EH1-L01C80B-S04G-L04
Inductive sensors
5

Secondary Device Functions

5.1

External Signal Blanking

5.1.1 Description
External signal blanking reduces the sensitivity to
interfering signals in the surrounding area. Interference is
filtered out.
This function allows influence from a given installation
situation to be reduced e.g. a switching interval offset
resulting from the ambient conditions. The function can be
activated and deactivated as required. The offset is
recorded and compensated for upon every reactivation.
For this reason, no damping material should be positioned
in front of the active surface when the function is activated.
Since the influence can be highly variable in any given
case, a data storage function is not available.
5.1.2 ISDU
Name Index
External 0x0421
Signal (1057)
Blanking
Tab. 5-1: External signal blanking – ISDU
External Signal Blanking
The function can be activated and deactivated via the
External Signal Blanking parameter.
Value Meaning Description
0x00 (0) Deactivated External signal blanking off
0x01 (1) Activated External signal blanking on
Tab. 5-2: Activate/deactivate external signal blanking
5.1.3 System Commands
Command Device Action
Value
0x81 (129) Application Reset – Resets writable
parameters to the default value.
0x82 (130) Reset Factory Settings – Resets writable
parameters to the default value.
Tab. 5-3: External signal blanking – System Commands
For an overview of all System Commands, see section 3.5
on page 21.
5.1.4 Variant Dependence
The functionality is available in all variants.
www.balluff.com
Subindex Access
0 R/W
Length Data Type
1 byte ENUM
Data Default
Storage
No 0
english 37