Balluff BES M12EH1-L01C40B-S04G-L04 Anleitung Seite 125

BES M12EH1-L01C40B-S04G-L04 / BES M18EH1-L01C80B-S04G-L04
Inductive sensors
4
Primary Device Functions (continued)
Teach-In Result
Outputs the current status of the currently active or of the
last teach-in process:
Teach-In
Flags SP
0 0 TP2 TP1
Bit 7
Tab. 4-9: Switching profiles – Teach-In Result
Bit Meaning Description
position
7 – Reserved
6 –
Flag SP TP2 0 = Teach point not detected
5
4 Flag SP TP1
1 = Teach point successfully
3...0 State 0 = IDLE – No currently active
1 = SUCCESS – Last process
2 = Reserved
3 = Reserved
4 = WAIT FOR COMMAND
5 = BUSY – Process active
6 = Reserved
7 = ERROR – Last process
Tab. 4-10: Switching profiles – Teach-In Result
Transducer Signal
The currently measured value of the sensor can be output
both in the LSSC and in the AdSS profile via the index
0x01B2 (434). This Transducer Signal corresponds to the
raw measurement values of the system. The data are not
processed further or prepared. Accordingly, they are not
linearized or calibrated in any way. This value can also
differ between different sensors. Accordingly, the result of
a measurement cannot be transferred in the event of a
sensor exchange.
www.balluff.com
Teach-In State
Bit 0
or not successfully
detected.
detected.
teach process
was successful.
– Wait for next command.
was not successful.
english 31