Important Safety Information; Safety Instructions - WOLFF Rührwerk Power X 1000 Originalbetriebsanleitung

Important safety information

WARNING!
Read all safety instructions and general
instructions. Failure to comply with the safety
instructions and general instructions may result
in electric shock, fire and/or serious injuries.
Keep all safety instructions and general
instructions in a safe place for future reference.
Before using the power tool, please read the
following and act accordingly:
– these operating instructions,
– the "General safety instructions" on the
handling of power tools in the enclosed
Booklet.
– the currently valid site rules and the
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The power tool
may be operated only if it is
– for its intended use,
– in perfect working order.Faults which
compromise safety must berepaired
immediately. Intended use The mixer is
designed
– for commercial use in industry and trade,
– with mixer paddle of appropriate size and
shape,
– for mixing liquids of low viscosity such
as paint, varnish, adhesive, light plaster,
resin,
– for mixing material of high viscosity
such as plaster, mortar, lime, screed,
filler etc.,
– for mixing stiff and sticky material of
high viscosity such as adhesive, resin,
sealing and insulating compound etc.
– for use with mixer paddles and accessories
which are indicated in these instructions or
recommended by the manufacturer.
The mixer is not to be used for mixing foodstuffs.

Safety instructions

WARNING!
Read all safety instructions and general
instructions. Failure to comply with the
safety instructions and general instructions
may result in electric shock, fire and/or
serious injuries. Keep all safety instructions
and general instructions in a safe place for
future reference.
Do not process explosive materials
(e.g. highly inflammable solvents).
Power tools generate sparks that could
ignite the vapour given off.
Pull out the plug immediately and have the
power tool checked by customer service if it
falls into the stirred product. Should stirred
product makes its way into the
appliance, damage could ensue and cause
an electric shock.
When working, hold the power tool firmly
with both hands and ensure that you have a
secure footing. The power tool is controlled
more securely if held with both
Do not process any material containing
asbestos. Asbestos is carcinogenic.
Take protective measures if dust is likely to
be generated during work that is hazardous
to health, combustible or explosive. For
example: some dusts are carcinogenic.
Wear a protective mask and use a
dust/particle extraction system if one can be
fitted.
Wait until the power tool has come to
a stop before putting it down. The cutting
accessory may snag, causing the
operator to lose control of the power tool.
Do not use the power tool if it has
a damaged power cord. Do not touch
the damaged power cord and pull out
the mains plug if the power cord is
damaged during work. Damaged power
cords increase the risk of an electric
shock.
If power tools are to be used outside,
connect them to a residual current breaker.
13
electric
hands.