Technical Data; Safety; Safety Instructions - WOLFF 013463 Betriebsanleitung

Comes with:
Triac S
Single nozzle 5 mm
Quick welding nozzle for polyolefin 5 mm
Diamond sharpening stone
Pressure roller 15 mm
Quarter moon knife
Trimming guide
Wire brush
Round nozzle
Rapid welding nozzle
Carrying case
Operating manual
Very hot surface near the nozzle! Danger of burning
skin.
Never leave the machine without supervision! Never
use or put the machine adjacent to inflammable or
explosive materials. Otherwise you might cause fire or
explosion due to hot machine parts.
Use this machine only
for the defined application
in a technically perfect condition
03/2011 Triac Set #013463

1.0 Technical data

Power supply . . . . . . . . . . . . . . . . . . . . . . . . .230 V AC (110 V)
Power consumption . . . . . . . . . . . . . . . . . . . .1600 W (1600 W)
Air temperature . . . . . . . . . . . . . . .adjustable from 20 to 650°C
Air flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230 L/min
Air pressure . . . . . . . . . . . . . . . . . . . . . . . . .3000 Pa (30 mbar)
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . . .- dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . . . . . .- dB(A)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3 kg
Weight complete set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3,8 kg
Accessories (for Leister Triac-Set S, Triac S and Triac PID):
Heating element 1.55 kW
Heating element 1.55 kW
Single nozzle 5 mm
Quick welding nozzle 5 mm
Quick welding nozzle for polyolefin 4 mm
Quick welding nozzle for polyolefin 5 mm
Correction nozzle
Mipolam nozzle
Gooseneck nozzle
Radiator nozzle
Broad nozzle 20 mm
Broad nozzle 40 mm
Quick welding nozzle for
elastic wall coverings
Carrying case for welding machines Gr. 2 Triac Item no. 33866

2.0 Safety

The welding gun Triac S is designed to the common safety
requirements according to IEC 745 and VBG 7j (national
specification).

3.0 Safety instructions

Disconnect power supply before doing any maintenance at the
device. Maintenance only by qualified personnel. Use only
genuine spare parts.
3.1 Introduction
This operating manual helps you to become familiar with the
Triac Set for your maximum benefit. You get helpful information
to realise and avoid danger.
Thus you do not only improve your own safety, but decrease
repair costs and extend the durability of your tool.
This operating manual must be read in any case before starting
work with the tool. Also maintenance personnel must have read
and understood the instructions.
3.2 Danger while working with the machine
The Triac Set is designed to the state of the art and the current
technical standards. Nevertheless its usage could cause danger
for life or material values.
Item no. 13464
Item no. 21200
Item no. 13465
Item no. 13308
Item no. 13466
Item no. 41213
Item no. 13469
Item no. 13467
Item no. 13468
Item no. 13470
Item no. 13472
Item no. 13473
Item no. 13471
8