Abicor Binzel ABIPLAS WELD 250 MT Betriebsanleitung Seite 22

English Translation of the original operating instructions
EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these Operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
1 Identification
1.1 EU Declaration of Conformity
1.2 Responsibilities of the User
2 Product description
2.1 Designated use
2.2 Use contrary to the designated use EN-4
2.3 Technical Data
2.4 Abbreviations
2.5 Nameplate
3 Safety instructions
3.1 Classification
3.2 Emergency information
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
5.1 Functional description
6 Putting into operation
6.1 Equipping the torch body
®
ABIPLAS WELD 250 MT
6.2 Clamping the torch body
6.3 Connecting the cable assembly
on the machine side
6.4 Connecting the coolant
6.5 Setting the gas flow rate
EN - 2
EN-3 7
EN-3
EN-3 8
EN-4 9
EN-4 9.1
9.2
EN-4
10
EN-6
EN-6
11
EN-6
EN-7 12
EN-7 12.1
12.2
EN-7 12.3
EN-8
EN-8
EN-8
EN-9
EN-10
EN-10
EN-12
EN-12
EN-13
EN-14
®
ABIPLAS
Operation
Putting out of operation
Maintenance and cleaning EN-16
Torch body
Cable assembly
Troubleshooting
Dismounting
Disposal
Materials
Consumables
Packaging
WELD 250 MT
EN-14
EN-16
EN-17
EN-17
EN-18
EN-19
EN-20
EN-20
EN-20
EN-20