Kawai MP9000 Bedienungsanleitung Seite 62

Soft Pedal
Status 2nd Byte
BnH 43H
n=MIDI channel number
vv = Control Value
Sound controllers #3-6
Status 2nd Byte
BnH 48H
BnH 49H
BnH 4aH
BnH 4bH
n=MIDI channel number
vv = Control Value
Common Effect
Status 2nd Byte
BnH 5bH
BnH 5cH
BnH 5dH
n=MIDI channel number
vv = Control Value
NRPN MSB/LSB
Status 2nd Byte
BnH 63H
BnH 62H
n=MIDI channel number
mm=MSB of the NRPN parameter number
ll=LSB of the NRPN parameter number
NRPN numbers implemented in MP9000 are as follows
NRPN # Data
MSB LSB MSB
01H 20H mmH
01H 63H mmH
01H 64H mmH
01H 66H mmH
* Ignoring the LSB of data Entry
* It is not affected in case of modifying cutoff if tone does not use the dcf.
RPN MSB/LSB
Status 2nd Byte
BnH 65H
BnH 64H
n=MIDI channel number
mm=MSB of the RPN parameter number
ll=LSB of the RPN parameter number
3rd Byte
vvH
:0H-fH(ch.1 - ch.16)
:00H - 7fH(0 - 127)
0 - 63 =OFF, 64 - 127=ON
3rd Byte
vvH Release time
vvH Attack time
vvH Cutoff
vvH Decay time
:0H-fH(ch.1 - ch.16)
:00H - 7fH(0 - 127)
3rd Byte
vvH Reverb depth
ss Rotary slow / fast
vvH EFX depth
:0H-fH(ch.1 - ch.16)
:00H - 7fH(0 - 127)
3rd Byte
mmH
llH
:0H-fH(ch.1 - ch.16)
Function & Range
Cutoff offset
mm:0eH - 40H - 72H(-50 - 0 +50)
Attack time offset
mm:0eH - 40H - 72H(-50 - 0 +50)
Decay time offset
mm:0eH - 40H - 72H(-50 - 0 +50)
Release time offset
mm:0eH - 40H - 72H(-50 - 0 +50)
3rd Byte
mmH
llH
60
Default = 00H
Default = 40H
ss: 0-3fH = slow 40H-7fH = fast
:0H-fH(ch.1 - ch.16)