Gude GHS 500/8TB Originalbetriebsanleitung Seite 33

m
Remove all undesirable items, e.g. nails
and wire, before working
Guarantee
Warranty period of 12 months applies to commercial
use and 24 months applies to private use and com-
mences on the day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with
indication of date of sale must be presented in case of
claiming for the warranty rights.
Warranty does not cover unprofessional use such as de-
vice overload, violent use, damage caused by third party
or foreign materials, failure to comply with operations
and assembly manual, and normal wear and tear.
Failure removal
Failures
Splitting knife is not moving
Spalter hat keine Leistung
Hydraulic pump is whistling, split-
ting knife running jerkily
2
4
1
Causes
Adjust the two-hand control and
starting levers
Few hydraulic oil
Trigger is bent; hydraulic piston on
the valve is not fully seated
Wood has many knobs and the
splitting knife is getting stuck
Control arm is bent
Oil loss, bottom contamination
Few hydraulic oil
5
Important information for the customer
Please be sure to know that returning the product
in or after the warranty period must be made in the
original packaging.
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
We will quickly help you and without needles
bureaucracy at our web pages at www.guede.com
in the Servicing part. Please help us be able to help
you. In order to identify your device in case of claim
we need the serial No., product No. and year of pro-
duction. All this data can be found on the type label.
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Removal
Defective control valve - to be
replaced in a service centre only
Hydraulic oil to be added
Check all screws on the trigger
Adjust the trigger so that the
hydraulic piston on the valve is fully
seated
Lubricate the splitting knife
Put the control arm back to the
starting position
Tighten the screws replace the hose
Hydraulic oil to be added
29