Inhaltsverzeichnis
Werbung
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.2 No. 13)
Chassis and Power Fan Connectors
(4-pin CHA_FAN1)
(see p.2 No. 9)
(3-pin PWR_FAN1)
(see p.2 No. 23)
CPU Fan Connectors
(4-pin CPU_FAN1)
(see p.2 No. 3)
ATX Power Connector
(24-pin ATXPWR1)
(see p.2 No. 4)
Downloaded from
www.Manualslib.com
The front panel design may differ by chassis. A front panel module mainly
consists of power switch, reset switch, power LED, hard drive activity LED,
speaker and etc. When connecting your chassis front panel module to this
header, make sure the wire assignments and the pin assign-ments are
matched correctly.
CHA_FAN_SPEED
+12V
GND
FAN_SPEED_CONTROL
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your
power supply along with Pin 1 and Pin 13.
ASRock H61M-HVGS / H61M-HVS Motherboard
manuals search engine
Please connect the chassis
speaker to this header.
Please connect the fan cables
to the fan connectors and
FAN_SPEED_CONTROL
match the black wire to the
ground pin.
Please connect the CPU fan
4 3 2 1
cable to the connector and
match the black wire to the
GND
+12V
ground pin.
CPU_FAN_SPEED
Pin 1-3 Connected
3-Pin Fan Installation
Please connect an ATX power
12
24
supply to this connector.
1
13
20-Pin ATX Power Supply Installation
12
24
1
13
23
Werbung
Inhaltsverzeichnis
