Inhaltsverzeichnis
Werbung
2.7 Onboard Headers and Connectors
Serial ATAII Connectors
(SATA2_0: see p.2, No. 10)
(SATA2_1: see p.2, No. 8)
(SATA2_2: see p.2, No. 12)
(SATA2_3: see p.2, No. 11)
Serial ATA (SATA)
Data Cable
(Optional)
USB 2.0 Headers
(9-pin USB6_7)
(see p.2 No. 15)
(9-pin USB8_9)
(see p.2 No. 16)
Print Port Header
(25-pin LPT1)
(see p.2 No. 18)
Downloaded from
www.Manualslib.com
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
SATA2_3
SATA2_2
USB_PWR
1
USB_PWR
SLCT
PE
BUSY
ACK#
SPD6
SPD7
GND
ASRock H61M-HVGS / H61M-HVS Motherboard
manuals search engine
These four Serial ATAII
SATA2_1
(SATAII) connectors support
SATA data cables for internal
storage devices. The current
SATA2_0
SATAII interface allows up to
3.0 Gb/s data transfer rate.
Either end of the SATA data
cable can be connected to the
SATA / SATAII hard disk or the
SATAII connector on this
motherboard.
Besides six default USB 2.0
ports on the I/O panel, there
are two USB 2.0 headers on
this motherboard. Each
USB 2.0 header can support
two USB 2.0 ports.
P-9
P+9
GND
DUMMY
GND
P+8
P-8
This is an interface for print
STB#
SPD0
port cable that allows
SPD1
SPD2
SPD3
convenient connection of printer
SPD4
SPD5
devices.
1
SLIN#
PINIT#
ERROR#
AFD#
21
Werbung
Inhaltsverzeichnis
