Automatic Filtering Programme - Teuco 629 Betriebsanleitung

EN
INSTRUCTIONS FOR USE

AUTOMATIC FILTERING PROGRAMME

Setting the filtering programs means deciding the
duration (in hours) of the filtering stage, which is
carried out once a day and the delay (in hours) from
D 1
the start of the first filtering operation, from when the
adjustment is made .
ADJUSTMENT OF THE DURATION OF THE
FILTRATION:
press the "Light" key for 5 seconds and the writing
"D 1" appears on the display .
The duration of the filtering operation needs to be
decided according to the more or less intensive use
of the pool and to environmental conditions .
D 1
press the " p " and "q" keys within 5 seconds to set
the duration of the filtration (from 0 to 12 hours) .
ADJUSTMENT OF THE INTERVAL BETWEEN
FILTRATIONS:
Confirm the setting by pressing the "Light" key .
The writing "S 6" appears on the display .
S 6
press the " p " and "q" keys within 5 seconds to
manually set the interval between filtrations (from 0
to 23 hours) .
if the filtration interval parameter is not modified, the
pre-set interval will be 45 minutes .
629
24