Automatic Filtering Programme - Teuco SEASIDE 641 HA Bedienungsanleitung

EN
INSTRUCTIONS FOR USE

AUTOMATIC FILTERING PROGRAMME

Setting the filtering programs means deciding the
duration (in hours) of the filtering stage, which is
carried out once a day and the delay (in hours) from
the start of the first filtering operation, from when the D 1
adjustment is made .
ADJUSTMENT OF THE DURATION OF THE
FILTRATION:
Press the "Light" key for 5 seconds and the writing
"D 1" appears on the display .
The duration of the filtering operation needs to be
decided according to the more or less intensive use
of the pool and to environmental conditions .
D 1
Press the " p " and "q" keys within 5 seconds to set
the duration of the filtration (from 0 to 12 hours) .
ADJUSTMENT OF THE INTERVAL BETWEEN
FILTRATIONS:
Confirm the setting by pressing the "Light" key .
The writing "S 6" appears on the display .
S 6
Press the " p " and "q" keys within 5 seconds to
manually set the interval between filtrations (from 0
to 23 hours) .
If the filtration interval parameter is not modified, the
pre-set interval will be 45 minutes .
641 HA
9