Boundary Wire Basics - Landxcape LX835 Benutzerhandbuch

TABLE 1
Schedule of 3 days
Time/
per day Sunday Monday Tuesday Wednesday Thursday Friday Saturday
3 h / work* /
5 h / work* /
7 h / work* /
9 h / work* /
Only for reference
TABLE 2
Schedule of 5 days
Time/
Sunday Monday Tuesday Wednesday Thursday Friday Saturday
per day
1 h / work* work work
3 h / work* work work
5 h / work* work work
7 h / work* work work
9 h / work* work work
* Border cut will be done on initial mowing of the day.
Only for reference
Note: During the operation according to the working schedule, press
and , Landxcape TM can be forced to end work of the day .
16
work / work* /
work / work* /
work / work* /
work / work* /
work work* /
work work* /
work work* /
work work* /
work work* /
4.4 How efficiently will my Landxcape
mow the grass?
Mowing times are different for every lawn depending on the factors
mentioned below. Gradually adjust the time you allow Landxcape
mow each day until you find the most suitable setting.
TM
Your Landxcape is capable of mowing areas of different sizes,
although this depends on various factors, such as:
• Species of grass in your lawn and its growth rate
• Sharpness of the cutting blades
• Humidity
• Surrounding temperature
• Amount of obstacles in your Lawn
Unlike most other mowers, Landxcape
which is able to cut the surrounding grass as much as possible. The holes
on the bottom of the charging base allow the grass to grow through the
base to help disguise it and create an elegant appearance.
TM
Landxcape 's cutting height can be adjusted. Before starting your
TM
Landxcape for the first time, you should cut the grass to the height
no more than 6 cm with your manual lawnmower. Then, set the cutting
TM
height of your Landxcape to its maximum setting (6 cm) for its first time
mowing. (See Fig. F)
TM
Your Landxcape will cut best in dry weather.It is also feasible to let
TM
your Landxcape work on rainy days as long as the lawn is solid.
Check and clean your mower regularly.
TM
Your Landxcape is afraid of lightning storms. In case of a lightning
TM
storm, protect Landxcape by unplugging the charging station,
disconnecting the boundary wire, and making sure Landxcape
allowed to charge.
TM
Your Landxcape loves mowing grass and requires the cutting blades to be
kept in good condition to cut at its best. Landxcape
by itself, but will sometimes need your help to prevent damage to itself.
TM
• Never let Landxcape travel over gravel.
• Remove or prevent access to obstacles that Landxcape
accidentally climb on and damage its blade turning disc.
• Remove all debris and foreign objects from your lawn.

5. Boundary Wire Basics

5.1. Pegging the Boundary Wire
Use the boundary wire distance gauge to set the correct distance
between the wire and the border of your lawn (more than 26cm).This
is the recommended distance. The provided distance gauge ensures
proper installation.
If your neighbor also uses a Landxcape
metre between your boundary wire and your neighbor's.
The boundary wire must outline the intended mowing area
exactly. Your Landxcape
TM
will become confused by extra bends or
coils of boundary wire that are not part of its mowing area (See Fig.
G). If there is excess boundary wire after the mowing area has been
outlined, cut it off and store this additional wire in a separate location.
It is important to leave the necessary length where it connects to the
charging station so it can be connected and still remain buried.
5.2 Burying the Boundary Wire
If you are planning to bury the boundary wire, it is recommended to first
peg it down. This allows you to easily change the layout if necessary before
burying the wire. When the boundary wire installation is complete, have
TM
Landxcape follow and check the path by pressing
TM
allows your Landxcape to adjust to its new environment. .
TM
TM
to
TM
uses a side charging system,
TM
is not
TM
can do most things
TM
could
TM
, keep a spacing of at least 1
and . This
EN