Function Messages; Error Messages - Landxcape LX835 Benutzerhandbuch

8. Function Messages

Display
Rain delay activated.

9. Error Messages

Display
Landxcape
working area.
Wheel motor blocked
Blade disc blocked
Landxcape
Landxcape
Landxcape
down.
Battery error
EN
Message
Cause
1. If Landxcape
inside its territory. Turn Landxcape
2. If Landxcape
verify that the charging station is properly connected to the charger and that the charger is
TM
is outside
connected to a suitable power supply. If they are properly connected, the boundary wires are
clamped incorrectly and must be reversed.
3. If the LED light on the charging station turns on red, confirm that the boundary wire is
well connected to the clamps on the charging station. If the problem persists, check that the
boundary wire hasn't been cut.
1. Turn Landxcape
2. Turn Landxcape
3. If the error message is still displayed, turn power off; turn Landxcape
check if there's anything preventing the wheels from rotating.
4. Remove any obstruction, turn Landxcape
1. Turn Landxcape
2. Turn Landxcape
rotate.
3. Remove any obstruction.
4. Turn Landxcape
height;
5. Turn Landxcape
1. Turn Landxcape
2. Take Landxcape
3. Turn Landxcape
TM
is trapped.
4. If the error message is still displayed; turn power off; turn Landxcape
Check if there is anything preventing the wheels from rotating.
5. Remove any obstruction, turn Landxcape
1. Turn Landxcape
2. Take Landxcape
then .
TM
is lifted up. 3. If the error message is still displayed: turn Landxcape
down and check if there's anything preventing the front wheels from rotating.
4. Remove any possible object, turn Landxcape
then .
TM
is upside
Turn Landxcape
1. Check the battery temperature. If the temperature is too high, wait until the
temperature has cooled down. Press
2. If the error message is still displayed, replace a new battery. Restart Landxcape
Press then
3. If the error repeatedly occurs, try to change the working schedule.
No action is required.
Action
TM
is actually outside its territory: turn Landxcape
TM
on. Press then
TM
is inside its territory, check if the LED on the charging station is green. If not,
TM TM
off; take Landxcape to an area free of obstacles.
TM
on. Press then .
TM
upright, turn power on. Press
TM
off.
TM
upside down and check if there's anything preventing the blade disc to
TM
upright and take it to an area with short grass or adjust the cutting
TM
on. Press then .
TM
off;
TM
to an area in your lawn free of obstacles obstacles.
TM
on. Press then .
TM
upright, turn power on. Press
TM
off.
TM
to a lawn area clear of obstacles, turn Landxcape
TM
upright, turn Landxcape
TM
upright. Press then .
then
.
Action
TM TM
off, take Landxcape
.
TM
upside-down and
then
TM
upside-down.
then
TM
on. Press
TM TM
off, turn Landxcape upside-
TM
on. Press
.
TM
19
.
.
.