Boundary Wire Basics - Landxcape LX790 Benutzerhandbuch

Meanwhile, the icon will be flashing again and a number will be
displayed to indicate the date, for example,
29. When is flashing, use
to confirm. Then will be flashing. Use the same method to select
the number and press to confirm to finish the date setting.
Only for reference
Meanwhile, the icon will be flashing and the time will be displayed,
for example, . When is blinking, use
the number and press to confirm. Then
same method to select the number and press
time setting is completed and Landxcape
Only for reference
(3) Set work area
Keep pressing for 3 seconds. When the icon
. A number will be blinking on the display, for example,
the lawn area. The working time will be automatically set according to the
size of your garden. Use or
to confirm. Then Landxcape will enter the standby page.
TM
NOTE: When the number displayed is less than 200, the area will be
adjusted in increments / decrements of 50m
pressed. If the number displayed reaches 200 or bigger, the area will be
adjusted in increments / decrements of 100m
is pressed.
Only for reference
(4) Change default start time
The default start time of 9:00 can be changed to anytime by keep pressing
EN
, meaning September
or to select the number and press
or to to select
will be blinking, use the
to confirm. Now the
will enter the standby page.
TM
is blinking, press
, which is
to set the lawn area, and press
each time the /
2
2 each time the /
both and buttons at the same time until a ding sound is heard.
For example, keep pressing both
your Landxcape will start mowing from 14:05.
TM
Only for reference
5.4 How efficiently will my Landxcape
mow the grass?
Mowing times are different for every lawn depending on the factors
mentioned below. Gradually adjust the time you allow Landxcape
mow each day until you find the most suitable setting.
TM
Your Landxcape is capable of mowing areas of different sizes,
although this depends on various factors, such as:
• Species of grass in your lawn and its growth rate
• Sharpness of the cutting blades
• Humidity
• Surrounding temperature
• Amount of obstacles in your Lawn
Unlike most other mowers, Landxcape
which is able to cut the surrounding grass as much as possible. The holes
on the bottom of the charging base allow the grass to grow through the
base to help disguise it and create an elegant appearance.
TM
Landxcape 's cutting height can be adjusted between 3cm-6cm. Before
TM
starting your Landxcape
the height no more than 9 cm with your manual lawnmower. Then, set the
cutting height of your Landxcape
first time mowing. (See Fig. F)
TM
Your Landxcape will cut best in dry weather. Wet grass can build up
on the blade turning disc and within the motor, and can also cause
is
loose traction and slippage while working.Your Landxcape
lightning storms. In case of a lightning storm, protect Landxcape
unplugging the charging base, disconnecting the boundary wire, and
TM
making sure Landxcape
TM
Your Landxcape loves mowing grass and requires the cutting blades
to be kept in good condition to cut at its best. Landxcape
things by itself, but will sometimes need your help to prevent damage
to itself.
• Never let Landxcape
• Remove or prevent access to obstacles that Landxcape
accidentally climb on and damage its blade turning disc.
• Remove all debris and foreign objects from your lawn.

6. Boundary Wire Basics

6.1. Pegging the Boundary Wire
Use the boundary wire distance gauge to set the correct distance
between the wire and the border of your lawn (more than 26cm).This
and buttons at 14:05, and
TM
uses a side charging system,
for the first time, you should cut the grass to
TM
to its maximum setting (6cm) for its
TM
is not allowed to charge.
TM
TM
travel over gravel.
TM
TM
to
is afraid of
TM
by
can do most
TM
could
15