Electrolux GA60LICN Benutzerinformation Seite 9

Water hardness
1) Factory setting.
2) Do not use salt at this level.
If you use multi-tablets containing salt and
the hardness of your water is lower than
21°dH, you can set the lowest water
softener level. It deactivates the salt refill
indicator.
If you use standard detergent or
multi-tablets without salt, set the
proper water hardness level to keep
the salt refill indicator active.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
2. Press
Downloaded from www.Manualslib.com
German de- French de-
grees (°dH) grees (°fH)
47 - 50 84 - 90
43 - 46 76 - 83
37 - 42 65 - 75
29 - 36 51 - 64
23 - 28 40 - 50
19 - 22 33 - 39
15 - 18 26 - 32
11 - 14 19 - 25
4 - 10 7 - 18
<4 <7
hold simultaneously
the indicators ,
start to flash and the display is
blank.
.
• The indicators
go off.
• The indicator
flash.
manuals search engine
mmol/l
8.4 - 9.0
7.6 - 8.3
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
• The display shows the current
3. Press
change the setting.
4. Press the on/off button to confirm the
setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
You can set the released quantity of rinse
aid between level 1 (minimum quantity)
and level 6 (maximum quantity). Level 0
will deactivate the rinse aid dispenser and
and until
no rinse aid will be released.
and
Factory setting: level 4.
How to set the rinse aid level
The appliance must be in programme
and
selection mode.
1. To enter the user mode, press and
continues to
hold simultaneously
the indicators
ENGLISH
Clarke de- Water softener
grees level
58 - 63 10
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
5
18 - 22
13 - 17
5 - 12
< 5
1
setting: e.g. = level 5.
again and again to
and
,
9
9
8
7
6
1)
4
3
2
2)
until
and