SATA AE1023H Bedienungsanleitung Seite 63

AE103H/AE1023H-3
Pull out the cover, rotate
the adjustable pressure. The
pressure setting range is 8-10
bar.
Regularly check the water
level of the steam-water
separator. Do not exceed 50%
height of the separator. If
necessary, turn the locking
button to drain water
manually.
Check the lubrication
conditions every day to
ensure that the lubricating
oil drips into the oil atomizer
when stepping on the pedal. If
necessary, use a screwdriver
to adjust the adjusting screw
of the oil atomizer.
中文
EN DE RU KO
Press down the cover to lock
the pressure.
Check the lubricating oil
level every day, and open
the oil cap to add oil when
necessary. Attention: It is
forbidden to use lubricating
oil exposed to air for a long
time.
PT JA ES
63