Power; Moving The Scanner - Canon DR-3060 Installationshandbuch

Avoid locations that are subject to rapid temperature changes.
Condensation inside of the unit can result in inferior image quality. Use
this unit under the following environmental conditions:
Temperature:
Humidity:
Avoid locating the unit near equipment that generates electromagnetic
fields, including speakers, televisions, and radios.

Power

Before you plug the power cord into an outlet, be sure that the power
source meets the requirements of the unit.
Do not connect this unit to a power outlet that is shared with other
equipment. When using an extension cord, make sure that the extension
cord is rated for the current requirements of the unit.
Do not place other objects on the power cord. Do not step on the power
cord.
Do not bundle the power cord, and do not wrap the power cord around a
table or chair leg.
Do not pull on the power cord. Always grasp the plug when unplugging the
power cord.
Do not place other objects around the outlet.
If you have any questions concerning your local power supply, contact
your dealer or your local power company.

Moving the Scanner

The scanner weighs approximately 8.1 kg. Always use two hands when
moving the scanner, as shown in the illustration below.
10 degree C to 32.5 degree C
20% to 80% RH
Before Using the Unit
5