General; Additional Safety Instructions - Parker Domnick Hunter System Bedienungsanweisung

General

The Parker, domnick hunter heat-
ing system consists of a heating
jacket made of various materials,
a controller ICon-Box120, power
lead and optional extension leads.
Depending on the requirement the
jackets are designed with
• Metal-sheath
• Aluminium
coated
weave
• Pt100 sensors, thin-film, 2-wire
on controller and limiter
• various fastening types
• various operating voltages
and ratings.
• integrated temperature limiters

Additional Safety Instructions

The heating systems are intended
for use in industrial electric heating
apparatus. They correspond to the
European Standards
EN 60519-1, EN 60519-2 and
EN 14597.
Base for all safety requirements
are international standards and
national standards, directives and
regulations.
It therefore has to be operated by properly trained staff and users.
Maintenance, connection and repair have to be performed by trained,
6
glass-fibre
such as
Attention!
The heating unit is electrical equipment.
specialized and qualified staff!
They are used for heating-up and
compensation of heat losses on
columns, containers etc.
The maximum temperature of use
varies (pls. refer to specification
plate/label). The maximum achiev-
able temperature,
pends on the specific operating
conditions. It may be influenced by
the heat conductivity of the materials
and media to be heated as well as
by the throughput, the ambient tem-
perature, the insulating material and
the insulation thickness.
The heating systems have to be
operated in accordance
these standards and regulations!
The heating system is an electri-
cal equipment and should always
be protected by a residual-current
circuit breaker device
(RCD or ELCB).
however, de-
with