Specified Conditions Of Use; Principal Operating Parts; Description Of The Controls; Positioning Of The Motorbike On The Work Table - Corghi BL 600 Serie Betriebsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

The BL 600 rack has been exclusively designed to lift motorbikes, mopeds, citycar

and machine for garden that fall within the limits of the technical data.

ATTENTION

Any use of the machine other than the described use is to be considered as im-

proper and unreasonable.

ATTENTION

It is advisable to use only CORGHI original tools for the work.

Fig.9 shows the safety distances and the positions occupied by the operator during

the various working stages (A and B).

WARNING

Get to know your machine. Operators who know how to use their machines are the

best guarantee of safety and good performance.

Get to know the function and position of all the controls.

Check carefully that all the controls on the machine work correctly.

To avoid accident or injury, ensure that the equipment is correctly installed and oper-

ated and that all necessary maintenance work is carried out.

The rack must only be operated by persons of age (over eighteen). To prevent use by

unauthorised persons, the pneumatic supply can be disconnected at coupling and the

power supply can be interrupted by padlocking switch B Fig. 11.

Ascent selector (B ﬁ g.11) (BL 600).

If turned to the right the platform lift goes up (see illustrations on control plate attached

to the foot guard).

"PUMP" pedal (D ﬁ g.11)(BL 600 M). If pressed the lift goes up.

Descent button (A Fig.11) (BL 600).

If pressed the platform lift goes down (see illustration on control plate attacched to the

foot guard).

"RELEASE" pedal (E ﬁ g.11)(BL 600 M). If pressed the lift goes down.

Final drop engagement button (C Fig.11) (BL 600).

(Recess versions only). Used to enable last lift drop stage.

To achieve a uniform weight distribution, install the motorbike on the rack as centred

as possible. If the motorbike only has a kick stand, make sure that the centre of grav-

ity of the motorbike falls to the inside of the racks support base to avoid any unbalanc-

ing of the load; wherever possible, it is always good practice to position the motorbike

with its main stand.