Transport, Storage And Handling; Moving - Corghi BL 600 Serie Betriebsanleitung

TRANSPORT, STORAGE AND HANDLING

Packaged machines should be stored in dry and preferably well-ventilated places.
Ensure that there is suffi cient space between the packages to allow the instructions
printed on their sides to be read easily.
WARNING
To avoid damage do not place other articles on top of the packages.
- Size of packages (fi g.1):
• Depth 2310 mm
• Width 860 mm
• Height 600 mm
- Weight
• BL 600 with package -300 kg
• BL 600
- Position of centre of gravity:
See fi g.1
- Machine storage temperature: -25°C to +55°C.
WARNING
Carry out the described assembly and moving operations with great care.
Failure to follow these recommendations may result in damage to the machine
and put the operator's safety at risk.
WARNING
Before moving the machine, make sure that the capacity of the lift truck chosen
is appropriate for the centre of gravity and weight of the machine.
To move the packaged machine insert the forks of a fork lift truck into the special en-
try points in the base of the pallet (fi g.2). If you are moving the machine by means of
a crane or hoist (fi g.3), it is advisable to use special lifting belts or cables of the ap-
proved type.
- Lever under one side of the base to slightly raise the lift from the pallet.
- Insert the lift truck forks under the base and allow the lift to slide on to the forks
themselves.
- Position the lift in the desired place.
WARNING
It is absolutely forbidden to use protruding parts of the machine as points of at-
tachment.
Operator's manual BL 600
BL 600 M
-275 kg BL 600 M

Moving

with package 281kg
256kg
GB
21