Herunterladen Inhalt Inhalt Diese Seite drucken

Daily Maintenance And Product Repair; Daily Maintenance; Product Repair - COMFORTPOOL EasyHeat 3 Benutzer- Und Instandhaltungshandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4. Daily maintenance and product repair

4.1.

Daily maintenance

1. Properly set the temperature and humidity for a cosy pool environment, avoid overheating or excessive
cooling.
2. Do not put obstacles in front of the air inlet and outlet of the heat pump, otherwise the efficiency of the
heat pump will be reduced, or the heat pump will even stop.
3. Do not put your hand or the stick into the air inlet or outlet, do not remove the fan mesh, otherwise the
running fan might cause damage to you.
4. Do not use or store the heat pump near combustible gas or liquid such as thinners, paint, and fuel to
avoid fire.
5. Do not rinse the machine directly with water. It is recommended to use a household neutral detergent
or water clean the heat pump. It is strictly forbidden to use volatile oil, gasoline, thinner and other
substances.
6. Please clean the swimming pool and filtration system regularly to avoid damage to the unit due to filter
clogging.
7. If you do not use the heat pump during the winter, the power switch must be disconnected; unscrew the
inlet pipe to clear the water inside the machine. The pump must be stored in a frost-free area.
8. Please check the screws regularly for looseness, check whether the wires are worn or not, and whether
the connections are secure.
4.2.

Product repair

1. In case of abnormal conditions (abnormal noise, odour, smoke, electric leakage, etc.), please cut off the
power immediately, then contact your dealer, and inform the dealer of the product model and fault
details. The heat pump must be repaired by a professional. To avoid any danger, do not disassemble
and repair it yourself!
2. Before maintaining and repairing the machine, you must confirm that the machine has been turned off
and disconnected from the power supply. When opening the cover of the electrical box, it must be
confirmed that all the indicators in the electrical box have are switched off before operation.
25

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Easyheat 5Easyheat 6Easyheat serie

Inhaltsverzeichnis