COMFORTPOOL EasyHeat 3 Benutzer- Und Instandhaltungshandbuch Seite 17

This appliance contains hermetically sealed fluorinated greenhouse gases. The installation,
maintenance, repair, and disposal must be handled by the professional and qualified
technicians. Refilling the gas may only be done by a professional with a R32 operating
license. Gas leakage test must be done before and after the installation.
1. Use
a. It must be installed or removed by professionals, and it is
forbidden to dismantle and refit without permission.
b. Do not put obstacles before the air inlet and outlet of the
heat pump.
2. Installation
a. This product must be kept away from any source of fire.
b. The installation cannot be in a closed environment or
indoors and must be kept well ventilated.
c. Vacuum completely before welding, field welding is not
allowed, welding can only be performed by professional
personnel in a professional maintenance centre.
d. Installation must be stopped if any gas leakage, and the
unit must be returned to professional maintenance centre.
3. Transportation & Storage
a. Sealing is not allowed during transportation.
b. Transporting goods at a constant speed is needed to
avoid sudden acceleration or sudden braking, to reduce
collision of goods.
c. The unit must be far away from any source of fire.
d. Storage place must be bright, wide, open, and well
ventilated. If not, ventilation equipment is required.
4. Maintenance Notice
a. If maintenance or scrapping is required, please contact an authorized service centre.
b. Qualification requirement: all operator who dispose gas must be qualified by valid certification, issued
by a professional agency.
c. Please comply strictly with the requirements of the manufacturer when maintaining the heat pump of
filling the gas.
17