Leckey Squiggles Early Handbuch Seite 5

Check parts
Congratulations on purchasing your
Squiggles Early Sitting System. When
opening the box take care not to cut
through the box as you may damage some
of the parts contained inside. All of the
parts will be contained in polythene bags
with each one clearly labelled. Carefully
remove them from the boxes and check
you have all the parts you have ordered.
Safety First
Keep polythene bags away from
children.
Once you have checked you have all the
components you ordered you are then
ready to assemble the System.
Multi-tool
A number of adjustments will require the use
of the multi-tool, which is supplied with each
seat and can be found together with your
information pack.
Seat Assembly
Components will be disassembled for
shipping. You will receive the Seat base
assembly with cover and pelvic harness
fully attached together with the trunk
support and any additional components
you have ordered in separate packaging.
Dynamic trunk
support attachment
To attach the dynamic trunk support to
the seat base sleeve the plastic rods into
the receiving tubes on either side of the
seat base. Set to the minimum height and
secure with the allen bolts using the Leckey
tool provided.